BMW Sport Springs - ST Suspension 65294

BMW Sport Springs - ST Suspension 65294 Fitment: 2006 BMW E90 325i Sedan 2007-2013 BMW E90/E92 328i Coupe and Sedan 2006 BMW E90 330i Sedan 2009-2011 BMW E90 335d Sedan 2011 BMW E90 335i Sedan Lowering Specs: Front:1.2" Rear: 1.2" Founded in the...

BMW Performance Spring Set - Dinan D100-0926

BMW Performance Spring Set - Dinan D100-0926 These performance springs use increased spring rates to reduce body roll and tighten up handling, with a slight lowering to reduce the vehicle's center of gravity without rendering the car useless on the...

BMW Race Lowering Spring Set - H&R 50490-88

Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in...

BMW Sport Lowering Spring Set - H&R 50490-5

Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in...

BMW Sport Lowering Spring Set - H&R 50490-3

  Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting...

BMW Sport Lowering Spring Set - H&R 50490-4

Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in...

BMW Lowering Spring Set - Eibach 2092.140

BMW Lowering Spring Set - Eibach 2092.140 Eibach springs have supported innumerable race and championship winners over the last two decades. In series as different as Formula 1 and NASCAR, the winning factor is often chassis setup and tuning. When...

BMW S Tech Lowering Springs - Tein SKJ14-AUB00

BMW S Tech Lowering Springs - Tein SKJ14-AUB00 TEIN S.Tech Springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop for a more aggressive appearance and increased road holding capability. Designed to be used with...

BMW CONTROL Lowering Springs - aFe POWER 410-503003-N

BMW CONTROL Lowering Springs - aFe POWER 410-503003-N aFe Control is proud to release the Lowering Springs for the 2007-2013 BMW 335i (E90/92/93). These springs are Made in the USA and are engineered to optimize the factory shock absorber damping and...